INO/WA fix on mag release with GHK magazine

[IBICO]

Since the GHK have a more sharp edge on the magazine and not a curve like the original WA, it would crash against the mag release. So by filing the mag release in an angle will make the magazine enter the lower much more easy. In this video you will see me demonstrate first on the modified mag release and then after on a stock INO. The same problem is with the stock WA.

[momonaboy]

i usually have to hit my stock WA magazine pretty hard just to get it in or press the button when loading. if i do this it should fix my problem right?

[IBICO]

i usually have to hit my stock WA magazine pretty hard just to get it in or press the button when loading. if i do this it should fix my problem right?

Yeah.. This fix would work on any magazine really.. Just with the GHK it is pretty much necessary.

[momonaboy]

got this one done today too! 20x easier to insert mags. thanks alot!

[Hawk]

I'll try this
I hope it doesn't affect other types of magazines (i.e. Bomber)...

[IBICO]

I'll try this
I hope it doesn't affect other types of magazines (i.e. Bomber)...

This would not affect any type of other magazines if they are having same locking mechanism as the AR. This is just to add a more angle on the underside of the mag release. Not top. The top is what hold the magazine up and in place.

This would actually make improvement on any magazine you use. Even maybe on real AR if the angle is steep.